ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Zuki One on June 20, 2005, 05:23:58 PM

Title: 1.6 head spec ?'s
Post by: Zuki One on June 20, 2005, 05:23:58 PM

Stock 1.6 head  spring pressure? spring height?

Title: Re: 1.6 head spec ?'s
Post by: Zuki One on June 21, 2005, 09:51:59 AM

btt

Title: Re: 1.6 head spec ?'s
Post by: Rhinoman on June 22, 2005, 08:36:19 AM

Valve spring free length:
                Standard, 50.46mm (1.9866in)
                Service limit 48.5mm (1.9094in).
Valve spring preload:
                 Standard, 24.8-29.2kg for 41.5mm (54.7-                  64.3lb/1.63in)
                 Service Limit, 22.8kg for 41.5mm  (50.2lb/1.63in)

Personally I wouldn't use anything outside of the limits for a new part. I have had bad experiences in the past with parts that were supposedly still servicable. It seems that you get a bit more wear each time the parts are disturbed because they need to break in a little bit again and that then takes them past the limit.

Title: Re: 1.6 head spec ?'s
Post by: Zuki One on June 22, 2005, 04:31:44 PM

Thank you! ;D