ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Bobzooki on January 19, 2005, 05:41:27 AM

Title: DEAD ECM anybody?
Post by: Bobzooki on January 19, 2005, 05:41:27 AM

Does anybody have a totally dead Sidekick ECM?

I'm looking for one, just to get the connectors off it, as an easy way to interface a MegaSquirt II ECM into the existing harnesses on my Kick.

Title: Re: DEAD ECM anybody?
Post by: Rhinoman on January 19, 2005, 06:05:52 AM

I've been looking for one myself for a long time. I did get one but it has the wrong connectors on it  :( even though it came off an 8V TBI same as mine. I think it might be cheaper and easier to replace the loom to match the housing then find the right one for a reasonable price.

Title: Re: DEAD ECM anybody?
Post by: Bobzooki on January 19, 2005, 06:12:49 AM

Oh, yeah - good point - I'm looking for an ECM from a 16 valve.

Title: Re: DEAD ECM anybody?
Post by: HUMZUKI on January 19, 2005, 06:42:21 AM

Quote

Does anybody have a totally dead Sidekick ECM?

I'm looking for one, just to get the connectors off it, as an easy way to interface a MegaSquirt II ECM into the existing harnesses on my Kick.

I Didn't think II was available yet?

Title: Re: DEAD ECM anybody?
Post by: Bobzooki on January 19, 2005, 07:29:45 AM

Correct.  II should be out this month.

Title: Re: DEAD ECM anybody?
Post by: steveofrost on August 08, 2005, 11:47:48 AM

I just got a new ECM for my Kick a while back and I still have the old one lying around. PM me if interested...

steveo

ps Anyone know how to fix these damn things?

Title: Re: DEAD ECM anybody?
Post by: Chief on August 08, 2005, 12:53:20 PM

Quote from: steveofrost on August 08, 2005, 11:47:48 AM

I just got a new ECM for my Kick a while back and I still have the old one lying around. PM me if interested...

steveo

ps Anyone know how to fix these damn things?

If your's is the 91 listed, it won't work for Bob. 8v vs 16v.

Bob, what is the benefit of the Megasquirt II on a N/A motor?

Title: Re: DEAD ECM anybody?
Post by: Rhinoman on August 08, 2005, 01:21:10 PM

I managed to get one for my project in the end. It is a 16V but has the same connector as the 8V (totally different pcb though) so an 8V one might be OK for you too, you would have to check that the number of pins tallies. My connector is shown below, it has a completely different pin to that shown in the FSM, pin numbers are taken from the silkscreen.

(http://www.btinternet.com/~j_holland/images/ecu_conn.jpg)

Title: Re: DEAD ECM anybody?
Post by: cj on August 08, 2005, 03:43:34 PM

I've got one unfortunately but I'm keeping it for the same reason you want one  ;) Finally fuel and ignition control and soon the auto as well  8)

Title: Re: DEAD ECM anybody?
Post by: wildgoody on August 09, 2005, 11:16:42 PM

Good news Bob, MegaSquirtII is going
to be released next week, it's got a new
CPU with more memory than the first MSII
that was released, this one is being dubbed
the V2 and requires a different programing
program, and they want the infrastructure
in place before the release of this version

Happy Day,
Wild