ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bentparts on October 19, 2006, 06:06:51 PM

Title: coil disable
Post by: bentparts on October 19, 2006, 06:06:51 PM

I need to crank my motor over for about 15 seconds to test the oil system on my turbo, and I'm wondering if it's safe to unplug the coil lead to keep the engine from firing. Will this dmage the ecu or any other components? Thanks. BTW, the turbo tracker is about ready to run, and I'll be posting photos when it's finished.

Title: Re: coil disable
Post by: bentparts on October 20, 2006, 04:17:34 AM

 ??? Anyone? Someone must have done this before.

Title: Re: coil disable
Post by: Rhinoman on October 20, 2006, 04:46:19 AM

Safest method is to disconnect the harness from the coil, If you stop the coil from producing the high energy pulse then you don't need to worry about where it will end up.

Title: Re: coil disable
Post by: bentparts on October 20, 2006, 05:02:03 AM

Thanks Rhinoman, Sounds like a good solution