ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: WorkInProgress91 on October 21, 2006, 06:56:14 AM

Title: New front bumper!
Post by: WorkInProgress91 on October 21, 2006, 06:56:14 AM
Okay, we actually installed this a couple of months ago, but just got around to posting this up.  This bumper was built by a shop in Parchment, and was made out of 7'' C-channel.  The bumper uses the original mounts, and another small steel plate was welded on the front of the frame, and threaded for the bumper to bolt to.  Behind that bumper lies an m8000 tucked away from the elements.  I also got lucky enough to have a friend powdercoat it.  I'm very happy with the way it turned out, and intend for this gentleman that built it to create a rear bumper to match it.

(http://i68.photobucket.com/albums/i40/workinprogress91/048_48.jpg)

(http://i68.photobucket.com/albums/i40/workinprogress91/049_49.jpg)

(http://i68.photobucket.com/albums/i40/workinprogress91/050_50.jpg)

Title: Re: New front bumper!
Post by: WorkInProgress91 on October 21, 2006, 06:58:18 AM
here's the front plate welded on the frame for the mounts

(http://i68.photobucket.com/albums/i40/workinprogress91/053_53.jpg)

and here's the finished product

(http://i68.photobucket.com/albums/i40/workinprogress91/064_64.jpg)
Title: Re: New front bumper!
Post by: LilRed on October 21, 2006, 07:56:14 AM
Nice!  I like the way the winch is tucked back behind it!
Title: Re: New front bumper!
Post by: john1974 on October 21, 2006, 10:00:51 AM
Looks alot like the ibuiltbumpers.com bumper for sidekicks, trackers... nice work tho...looks good!
Title: Re: New front bumper!
Post by: Low Range on October 21, 2006, 10:05:49 AM
Nice, where did you get the d-ring tabs?
Title: Re: New front bumper!
Post by: WorkInProgress91 on October 21, 2006, 02:08:50 PM
just bought a block of steel 3/4'' thick i think and had the builder cut two pieces out of it. 
Title: Re: New front bumper!
Post by: Drone637 on October 22, 2006, 10:49:44 AM
I like the design.  Did you come up with that or did the shop?
Title: Re: New front bumper!
Post by: Carnage on October 22, 2006, 12:50:25 PM
more pics!
Title: Re: New front bumper!
Post by: WorkInProgress91 on October 22, 2006, 04:57:17 PM
I requested the flat ends for hi-lift points, and i wanted the winch to be mounted behind the bumper.  The builder did an excellent job of tucking the winch in the best he could.  I'll try to get some pics of how it sits on the car and how much clearance there is, but i couldnt be happier with the way it turned out.  If anyone is interested in having a bumper built like this, i'd be happy to put you in contact with him. 
Title: Re: New front bumper!
Post by: crikeymike on October 23, 2006, 04:27:07 PM
How do you access the clutch handle for the winch?  There doesn't look to be any room.
Title: Re: New front bumper!
Post by: WorkInProgress91 on October 23, 2006, 08:24:34 PM
I'll have to get some pics up to show it, but the 4 mounting bolts for the bumper bolt to the bumper, leaving the clutch handle tucked up facing the vehicle.  its kind of a pain the ass to have to reach under there to engage the clutch, but im working on a lever right so that I can engage/ disengage the winch from up by the grille.
Title: Re: New front bumper!
Post by: lacrosse10604 on October 26, 2006, 09:00:09 PM
What would be the estimated cost?
Title: Re: New front bumper!
Post by: Quaddawg on October 27, 2006, 08:25:16 AM
Wow, I REALLY like that bumper... nice and tucked in!

I wish that were on the market, I would definitely buy one of those...

Really gives a GREAT approach angle!!  and none of that silly stinger crap...
Title: Re: New front bumper!
Post by: WorkInProgress91 on October 27, 2006, 11:32:30 AM
I'm not exactly sure what the cost would be.. The builder is a family friend, and i spent alot of time with him trying to help him and learning some skills along the way.  If anyone is interested, PM me and i can put you in touch with him.
Title: Re: New front bumper!
Post by: 89tintop on October 28, 2006, 03:53:29 PM
i like it alot, what body lift are you running? can he make an exact replica of that one? pm me his info I would love to talk to him. I was just getting ready to order a schrockworks bumber next week but at $600 shipped i was hoping to find something for less.