ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: casper 98 on October 23, 2006, 06:40:02 PM
-
Just ordered 30x9.5 pro comp mudd tires with rock crawler 15x7 2.5 bs Just wondering how many inches they would stick out of the wheel well. Thanks Next order calmini 3 inch suspension
-
I have the same size tires by BFG which are about the same as yours. I have 3.75 back space and they stick out about 2 inches. So yours should stick out about 3.25 inches. I like the way mine look, I bet you will like yours. Only problem is more mud being thrown up when I hit the trails. You should be concerned about rubbing though as mine barely clear the rear of the wheel well on full lock turns and yours will have a greater arc so they are more likely to rub significantly even with a lift. I have an inch of lift on mine.
-
I would like to see pic's of your ride. Do you have any body lift. Did you you fit the 30's with out any trimming.
-
i also run 15x7 wheels with 3.75" back spacing, with 30x9.5 goodyear mt/r's. i just have some 2" coil spacers. i dont find i rub at all, and the tires are pretty much flush with the fenders. the 2.5" back spacing wheels should stick out a little bit more. and i would say that they would rub the rear of the front inside fender when turning. mine just barely clear.
here are some pics
I hope this helps
(http://i44.photobucket.com/albums/f6/4njeep/IMG_0096.jpg)
(http://i44.photobucket.com/albums/f6/4njeep/IMG_0090.jpg)
(http://i44.photobucket.com/albums/f6/4njeep/IMG_0101.jpg)
-
i also run 15x7 wheels with 3.75" back spacing, with 30x9.5 goodyear mt/r's. i just have some 2" coil spacers. i dont find i rub at all, and the tires are pretty much flush with the fenders. the 2.5" back spacing wheels should stick out a little bit more. and i would say that they would rub the rear of the front inside fender when turning. mine just barely clear.
here are some pics
I hope this helps
([url]http://i44.photobucket.com/albums/f6/4njeep/IMG_0096.jpg[/url])
Mine has 15x7's with 3.5" backspacing, and mine seems to have more width than yours, are you sure your rims are that measurement?
Even my old rig with 15x7's 3.75" backspacing.
-
Mine has 15x7's with 3.5" backspacing, and mine seems to have more width than yours, are you sure your rims are that measurement?
Even my old rig with 15x7's 3.75" backspacing.
yes i am positive on the width and the offset. are you sure your rims arnt 15x8" or 2.5" offset??
that would make them stick out a little further.
-
Mine has 15x7's with 3.5" backspacing, and mine seems to have more width than yours, are you sure your rims are that measurement?
Even my old rig with 15x7's 3.75" backspacing.
yes i am positive on the width and the offset. are you sure your rims arnt 15x8" ??
that would make them stick out a little further.
Mine are and were 7" measure inside the lip where the bead sits, maybe I was supposed to measure outside edges, I thought they were measured inside.
-
yea, my 15x7s with 3.5" of backspacing stick out like Uncivilized's wheels do to..
(http://memimage.cardomain.net/member_images/10/web/514000-514999/514392_21_full.jpg)
-
ok. here is my bill of sale from when i bought them. it says right on it that they are 15x7, 5 on 5.5, it doesnt say the offset, but i know its 3.75". i had it measured before i put them on.
it moved the wheels out farther than the stock ones. it no longer rubs on the frame( i had 235/75x15 on stock wheels) and now i have 30x9.5x15 mt/r's
maybe its just the way im taking the pictures or something. the tread is almost lined up with the rear fender, and the sidewall sticks out about 3/4"
i whited out some info, dont mind that.
(http://i44.photobucket.com/albums/f6/4njeep/IMG_0375-1.jpg)
-
I have 30" MTR and 15x7 wheels and they stick out a coulpe of inch's.
Don't know what th offset would be.
(http://i34.photobucket.com/albums/d136/suzukiboyoz/30mtr.jpg)
-
I have 15x8 crawlers with 2.75" bs...
Yours won't stick out quite as far as mine.
These are 31x11.50 tires also..
SO, it will be about an inch or less narrower than this
(http://www.forumsigs.com/users/quaddawg605/TF/lquarter.jpg)
-
thanks for the pic's! Can't wait for my mine to show up. No use till I get the lift.
-
Sorry I don't have any pics of mine but I can state that with 3.75 backspace mine just fit within the wheel wells. If you go with 2.5 back space I am poitive you will get rubbing even with 2 inches of lift. If you go with a combo lift of say 4 inches you may be ok but I think enven then it will be close. It is all about the size of the arc that is made by the wheel sticking out past the fulcrum of the wheel more with 2.5 backspace. I would be prepared to have to do some wheel well cutting to fit 2.5 backspacing. Mine stick out about like stock93tracker wheels but they look like Quaddawg's wheels.
-
Like I said, I have 2.5 or 2.75 bs (forgot which) and they needed VERY little trimming in front, with a 2" lift....
Very little... a little bumper, and a little at the back of the fender, and this is with 11.5" wide tires, and a full inch wider wheel..
you can make them work, just get a sledge hammer, and get ready to trim a LITTLE...
it'll work..
don't get a body lift, they look SO FUNKY... so crappy.... to me, that is... I hate body lifts...
-
I orderd the 3 inch calmini sus. lift today. They said that I should be getting parts in 13 days. No body lift
-
Hey, hope you post some pics when you get everything done. Im sure its going to look good.