ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: malodin on November 06, 2006, 09:53:23 PM

Title: help need ecm pin out diagram
Post by: malodin on November 06, 2006, 09:53:23 PM

Im sure its been covered here before but all the surching ive done hasnt turned up much information, i have a 1993 geo tracker and need the ecu pin out diagram, in order to install a mixture meter i need to know which pins are which.  Any help would be appreciated.

Alex

Title: Re: help need ecm pin out diagram
Post by: Rhinoman on November 07, 2006, 07:36:42 AM

If its an 8V then there is a copy of the ECU circuitry showing pinouts on my website. You need to look under Schematics, yours will probably be the same as the one in the Vehicle Installation Drawing, Japanese TBI model.

http://www.btinternet.com/~j_holland

Title: Re: help need ecm pin out diagram
Post by: malodin on November 07, 2006, 08:13:11 AM

sweet thats exactly what i needed thank you.

Title: Re: help need ecm pin out diagram
Post by: Rhinoman on November 19, 2006, 08:24:14 AM

Did you get the meter installed?

Title: Re: help need ecm pin out diagram
Post by: malodin on November 19, 2006, 03:51:12 PM

not yet, actually it got put on the back burner for a bit.  im swapping tranny's out on my jeep