ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: vitara-dave on November 13, 2006, 08:47:30 AM

Title: Wiring - help
Post by: vitara-dave on November 13, 2006, 08:47:30 AM

I had to put in a new gasket in my engine (1600 16V) and know i've refitted everything. The problem is that i don't what to do with 1 plug of the wiring from the injection. It is a white plug at the end of the wiring loom, ends at the same place as the throttle position sensor. Can you help me? (If needed, i will try to show a picture.)

Title: Re: Wiring - help
Post by: Rhinoman on November 13, 2006, 10:41:22 AM

That would be for the injector, there should be a matching plug round the back of the throttle body.

Title: Re: Wiring - help
Post by: vitara-dave on November 14, 2006, 12:19:57 PM

Ive multipoint injection and all 4 injectors are connected. Ore is there more?

(http://pic40.picturetrail.com/VOL361/2035629/3943578/204902168.jpg)

(http://pic40.picturetrail.com/VOL361/2035629/3943578/204889781.jpg)

Title: Re: Wiring - help
Post by: vitara-dave on November 16, 2006, 03:25:17 AM

Can nobody help me?  :(
(The Vitara has to work this weekend...)

Title: Re: Wiring - help
Post by: mrfuelish on November 16, 2006, 10:25:41 PM

mine has one there like that also, I think it is for the california e.g.r. valve.

Title: Re: Wiring - help
Post by: Uncivilized on November 17, 2006, 05:30:46 AM

I checked my 95 canadian model, I traced the wires to something mounted to the back on the engine, looks similar to the EGR valve in a vertical position. It's very close to the heater core hoses entering the firewall, right above them.