ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: tracstar on November 16, 2006, 08:43:07 AM

Title: Calmini 3" and Spacers
Post by: tracstar on November 16, 2006, 08:43:07 AM

Is there anyone out there running calminis 3" suspension kit with 1.5" spacers? I was just woundering if it would pull to hard on the stock cv's when a tire was lifted.

Title: Re: Calmini 3" and Spacers
Post by: Bfunk on November 16, 2006, 09:49:04 AM

I ran 1" spacers on top of my 3" lift with no problems.
Brian

Title: Re: Calmini 3" and Spacers
Post by: cablesmurf on November 17, 2006, 07:49:29 PM

Well...since the struts are going to limit your down travel anyway, it's not a big deal. I run 1" spacers on my Calmini 3" lift, but if I were to do it again...I don't think i'd bother. Just trim a little more away.

Calmini 6" combo, 1" coil spacers and front strut mount flip...

(http://members.shaw.ca/samdog/Just%20needs%20bumpers.JPG)