ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: sammykicked on January 13, 2005, 11:47:55 AM
-
Was unable to locate.
We are building an 83 Sammy but putting in a newer
motor from a newer sidekick.
Going from 1300 to a 1600 16valve but cant get it 2 fire.
No spark.
Is there something we are missing? Any schematics out there for this conversion?
Sorry but this is the first ZUKI project ever.
Been a offroader for years with Jeeps
Thanks so much in advance.
Electrically challenged
-
ummmm could have something to do with the ECM, check all your fuses, hopefully its not your ecm, they suck, also check your o2 censor and fuse, check the ignition fuse thats the problems ive had with mine when it wouldnt start
-
That's kind of a highly guarded secret around the web,there are venders on here that used to charge 400.00 for that, you can get them now for around 200.00 all marked and ready to go. try trail tough. and give us a little more info if you think your close to getting it.
-
What do you have swapped ?
Did you get the ECU ?
The distributor in a 16V has a pickup,
no points, so if you don't have the electronic
ignition stuff, it will get no spark
Details are what answers are made of ;)
Wild
-
83 sammy?? I thought the 83 model was an SJ410.