ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: sklope on November 17, 2006, 07:09:45 PM

Title: Noisy front end after front strut install - 96 Tracker
Post by: sklope on November 17, 2006, 07:09:45 PM

Just installed new struts and the front end makes noise when turning sharply after the vehicle has set a while. The noise sounds like a bushing rubbing. Had the front end aligned and the mechanic said that it sounds like it may be the upper bushing on the struts. He said that I may want to put grease or vasoline on the bushing. Has anyone else had this problem and if you did is this how you repaired it??? Thanks!

Title: Re: Noisy front end after front strut install - 96 Tracker
Post by: crikeymike on November 17, 2006, 08:38:02 PM

If the top nut wasn't tightened correctly, then the top strut mount might make a squeaking noise.  When you loosen these, and the strut shaft turns with it, it makes a squeaking noise.  I'd be checking over the bolts and make sure they're tightened correctly. 

You shouldn't need any grease at all.

Title: Re: Noisy front end after front strut install - 96 Tracker
Post by: sklope on November 20, 2006, 11:17:05 PM

Checked the top nuts on the struts today. Found out that the washer that fits over the bushing was upside down ::). After flipping these washers and tightening the nuts back up, NO NOISE!!! Thanks for the help ;D!