ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: allian on November 26, 2006, 02:24:09 PM

Title: coil spacer question
Post by: allian on November 26, 2006, 02:24:09 PM
i've been reading about people using coil spacers for a few inch lifts on there kick/trackers.
i've also heard this a really cheep and eazy way to lift it you lil' buggy.
people have changed the rear shock to a crown vic to compensate for the 2' spacer, what about the front struts?
so you chang to another strut? or mod it in some way?
Title: Re: coil spacer question
Post by: WorkInProgress91 on November 26, 2006, 02:37:55 PM
yea you can either flip the strut top over, or install strut spacers.
Title: Re: coil spacer question
Post by: allian on November 26, 2006, 03:37:21 PM
is it hard to flip the strut top over? what does a strut spacer look like?
yea you can either flip the strut top over, or install strut spacers.
Title: Re: coil spacer question
Post by: gravity_storm on November 26, 2006, 05:16:14 PM
is it hard to flip the strut top over? what does a strut spacer look like?
yea you can either flip the strut top over, or install strut spacers.



This thread pretty much shows it all:

http://www.zukiworld.com/forum/index.php?topic=13687.msg125654#msg125654
Title: Re: coil spacer question
Post by: allian on November 26, 2006, 08:17:26 PM
is it hard to flip the strut top over? what does a strut spacer look like?
yea you can either flip the strut top over, or install strut spacers.



This thread pretty much shows it all:

[url]http://www.zukiworld.com/forum/index.php?topic=13687.msg125654#msg125654[/url]


that was all i needed to know about fliping the strut top. awsome write up!
one more thing with the coil spacer installed on all four struts, how ig af a gain in height did people recive?
what where you guys/gals biggest tire size?
Title: Re: coil spacer question
Post by: Digger on November 26, 2006, 11:26:53 PM
Check out my topic here:

http://www.zukiworld.com/forum/index.php?topic=12563.0

While it is my sale post for the spacers I make, it also has a bunch of useful info if you read through it. It will give you an idea of how much lift to expect from what height spacers, etc...
Title: Re: coil spacer question
Post by: allian on November 27, 2006, 08:16:09 PM
wow... thanks digger. i think i just might have to purchase a kit off of you.
31x10.5 here i come!
 ;D
Check out my topic here:

[url]http://www.zukiworld.com/forum/index.php?topic=12563.0[/url]

While it is my sale post for the spacers I make, it also has a bunch of useful info if you read through it. It will give you an idea of how much lift to expect from what height spacers, etc...