ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TrAkLsI on November 30, 2006, 07:12:24 PM

Title: cj axles and leafs in a swb tracker
Post by: TrAkLsI on November 30, 2006, 07:12:24 PM
Anyboby done this?  What's the good and bad about this.  Thanks,
Title: Re: cj axles and leafs in a swb tracker
Post by: kirknd4spd on November 30, 2006, 10:09:49 PM
good (maybe): straight front axle
bad: the axles are from a J**P!!
Title: Re: cj axles and leafs in a swb tracker
Post by: Uncivilized on December 01, 2006, 07:53:59 PM
Anyboby done this?  What's the good and bad about this.  Thanks,
Depends on the gearing you can get, the old CJ's had low r&p's, I'm not sure if you'll be able to get anything above 4:xx. You also need to look at axle widths, and the brakes - a neighbour of mine had an old CJ, and I'm sure it had drum brakes.
Title: Re: cj axles and leafs in a swb tracker
Post by: TrAkLsI on December 01, 2006, 11:03:43 PM
Uncivilized, do you know about installation, is it the same as toyota's.  I can get some cj's for cheap or should I look for some toy's.   Thanks alot,