ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mbmarkyb on December 11, 2006, 01:42:13 PM
-
Hello , been gone for a while but came back as couldnt stay away
Last time i was here i hadnt long finished my sas on my uk vitara, glad to say its still going well. still playing around with the setup but it works .
couple of pics
(http://pic15.picturetrail.com/VOL617/2393799/11998897/175192045.jpg)
(http://pic15.picturetrail.com/VOL617/2393799/11998897/175191996.jpg)
(http://pic15.picturetrail.com/VOL617/2393799/11998897/175195188.jpg)
(http://pic40.picturetrail.com/VOL385/1287625/12007799/175354461.jpg)
(http://pic40.picturetrail.com/VOL385/1287625/12007799/175354472.jpg)
(http://pic40.picturetrail.com/VOL385/1287625/11868010/172958154.jpg)
enjoy
-
nice!
is the front axle from a samurai?
-
yeah its a sammy front axle.
-
did you have to use wheel spacers?
-
yeah wheel spacers on the front none on the back , running the calmini 5.83 R&ps 26 spline arb with calmini 26 spline shafts 33s for the moment ,
-
Who are you ?
;D ;D ;D ;D
-
Hello Rhinoman, how are things ?
still on zukworld then
-
Since the subject fits ,here I am too after a long time away ......
hey mbmarkyb ,how are you ?
I think we started almost the same time the SAS to our kicks.
(http://www.to4x4.gr/gallery/albums/album40/Photo_100606_004.jpg)
(http://www.to4x4.gr/gallery/albums/album40/DSC02339.jpg)
(http://www.to4x4.gr/gallery/albums/album40/DSC00003.jpg)
-
Hello Rhinoman, how are things ?
still on zukworld then
Omnipotent, didn't you know? ;D Things have been pretty slow but the 1.6 should be going in the pick up tomorrow. Still trying to get another exhaust manifold cos mine was cracked and so was the replacement I was sent (no names). I think I've spent the last 3 months waiting for parts to turn up and then sending them back again and waiting for replacements.
-
Since the subject fits ,here I am too after a long time away ......
hey mbmarkyb ,how are you ?
I think we started almost the same time the SAS to our kicks.
([url]http://www.to4x4.gr/gallery/albums/album40/Photo_100606_004.jpg[/url])
([url]http://www.to4x4.gr/gallery/albums/album40/DSC02339.jpg[/url])
([url]http://www.to4x4.gr/gallery/albums/album40/DSC00003.jpg[/url])
Hi Apostolos!
Nice pictures! Love the flex on that last one. :D
-
Hi Heather :)
Yeah ,its ok ,works like I want,I m completely satisfed.
Im also getting prepared for the next SAS with stronger axles :)
-
Hi Heather :)
Yeah ,its ok ,works like I want,I m completely satisfed.
Im also getting prepared for the next SAS with stronger axles :)
Nate was telling me you're looking at Nissan Petrols?
-
Hi Heather :)
Yeah ,its ok ,works like I want,I m completely satisfed.
Im also getting prepared for the next SAS with stronger axles :)
Nate was telling me you're looking at Nissan Petrols?
Patrol's with 80 Series Toy outers would be good.
-
hi grvit, loking good mate i reckon it was around the same time.
Nice flex the weather where you are is far too nice.
Rhinoman , you must be getting you r stuff from the wrong source m8.
what pickup you got then?
time does fly
-
I found a pair of C200 Nissan Patrol MQ axles (1,20"-29 spline) that are free,no cost but they are not as strong as I want.I found though a pair of HJ61 axles from LCruiser which I bet they are strong,I think as the 80series are.We ll see,if we agree on the price ,I LL get them.
Hi Heather :)
Yeah ,its ok ,works like I want,I m completely satisfed.
Im also getting prepared for the next SAS with stronger axles :)
Nate was telling me you're looking at Nissan Petrols?
-
I found a pair of C200 Nissan Patrol MQ axles (1,20"-29 spline) that are free,no cost but they are not as strong as I want.I found though a pair of HJ61 axles from LCruiser which I bet they are strong,I think as the 80series are.We ll see,if we agree on the price ,I LL get them.
Hi Heather :)
Yeah ,its ok ,works like I want,I m completely satisfed.
Im also getting prepared for the next SAS with stronger axles :)
Nate was telling me you're looking at Nissan Petrols?
The MQ's should be strong enough for your needs. We had a guy in our club running them with dual t-cases and 36" rubber and they could take a beating.
-
well glad to hear that.Can I see a photo of the that truck ?
This is the truck I found that I can get the axles for free.
(http://www.to4x4.gr/gallery/albums/album40/DSC02430.thumb.jpg)
and these are its axles the ones that I identified as C200
FRONT
(http://www.to4x4.gr/gallery/albums/album40/DSC02418.jpg)
Rear
(http://www.to4x4.gr/gallery/albums/album40/DSC02426.jpg)
with removable diff cover.are we talking about the same axles cj ?
On the other hand I also found these (LC60 series)
(http://www.to4x4.gr/gallery/albums/album40/CIMG6445.jpg)
(http://www.to4x4.gr/gallery/albums/album40/CIMG6492.jpg)
the front one has an original Toy locker.These are not cost free :'(
what do you advise me cj ?
max tire size 235/85/16 or even 35x10,5x16 retread ,this type
(http://www.malatesta.it/img/prodotti/Kaiman.jpg)
or this type
(http://www.4x4tyres.gr/images/Alligator.jpg)
-
those nobby tyres will be a handful on the road the other simmex type tread are good , agreesive mind you ,
-
with the nobby tires, the truck when on road ,sounds like a 2nd world war fighter....
but they do MIRACLES off road...
-
Rhinoman , you must be getting you r stuff from the wrong source m8.
what pickup you got then?
I have a 1986 SJ413K with, as of this afternoon, a 1.6 Vit engine ;D. Still got a load of bits and pieces to sort but its nice to see an engine where theres been a big space for months. Biggest holdup was a missing flywheel bolt, couldn't put the engine in till I got that.
I got stuff from everywhere ;D. I think the main dealer misread the microfiche and got 410 parts. I'm waiting for some other bits to be resolved so I won't post any names.
(http://www.rhinoman.org/sj413k.jpg)
(http://www.rhinoman.org/engine_in.jpg)