ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: brace on January 10, 2005, 02:20:41 AM

Title: wheel ?
Post by: brace on January 10, 2005, 02:20:41 AM

I thought all 96 and below F150 rims were interchangeable w/ zuks.  My buddy has some rims off a '91 f150 and they don't fit his tintop.  

Title: Re: wheel ?
Post by: Crabzuki on January 10, 2005, 02:58:04 AM

Quote

I thought all 96 and below F150 rims were interchangeable w/ zuks.  My buddy has some rims off a '91 f150 and they don't fit his tintop.  

The bolt pattern is the same except for the center cut-out for the cap. Now on the 1990 F-150 the center cap opening will fit fine without the need of grinding the center hole to fit over the Zuki hub. ~CZ

Title: Re: wheel ?
Post by: tOnKa TrAcKeR on January 10, 2005, 03:11:31 AM

MY Tracker has rims off of a 79 Bronco  but heres the info i found in my parts book:

Samurai's bolt pattern is 5x5.5

other vehicles with the same bolt pattern:

other zukis (track/kick, x90) obviously

66-96 Ford F-150,Bronco

74-2002 Dodge/Plymouth Full Size Trucks/Vans & RamCharger/Trailduster.

94-up Kia Sportage

Now thats just the bolt pattern you also have to look at the center circle i had som rims off of a 1974 F-100 and it wouldnt fit on my tracker because the center hole would not fit around the front hubs.  hope this helps