ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: sidekick101 on January 07, 2007, 01:12:44 PM

Title: sacle 1 to 10
Post by: sidekick101 on January 07, 2007, 01:12:44 PM

will ti be benifital to adjust the valve lash. car has225,000 km on her. will it save gas or waste o time. 1 low10 get er done hahah

Title: Re: sacle 1 to 10
Post by: Jimiweld on January 07, 2007, 02:46:40 PM

Depends how out of adjustment they are whether or not it will help. If it rattles real loud then I would adjust them right away.
It's an easy thing to do so just do it and see what's going on in there.

Title: Re: sacle 1 to 10
Post by: Rhinoman on January 08, 2007, 04:50:57 AM

If they haven't been done for a while I would do them. You tend not to get a rattle on Zuk motors, the gaps close up as the seats wear. If you run with the gaps too small you can burn out an exhaust valve.