ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: HotRod on January 11, 2007, 08:08:37 PM
-
I'm taking off the Calmini 3rd (heimjoint already shot) on my 4dr and replacing it with teh stock 3rd and spacer.
problem is.
I've forgotten which way the 3rd link ball mounts.
which way is forward?
Picture A
(http://s109.photobucket.com/albums/n66/amandaplaywith/Suzukis/th_spacereone.jpg)
Picture B
(http://s109.photobucket.com/albums/n66/amandaplaywith/Suzukis/th_spacertwo.jpg)
Spacer made by SuzukHunter
Bought it over a year ago.
-
Really? ???
It's been so long that I've seen a stock one on I've forgetton. :-\
-
A is correct ;)
-
I would double check that upper joint to see if it has enough travel with your spacer installed. I think it will but still for safety’s sake I would pull the coils out and cycle the suspension with the shocks attached. Be sure to check for full up, full down, and flex.
Mike
-
A is correct ;)
"WOW" my guess was B
Thanks
I'll check for travel too.
Thanks again.
-
I would of guessed B too. I think that Mike guy has never worked on a Sidekick in his life, much less been under one working on it's suspension ::). You better check his credentials ;D
Zig
-
I would of guessed B too. I think that Mike guy has never worked on a Sidekick in his life, much less been under one working on it's suspension ::). You better check his credentials ;D
Zig
Your probley right.
I don't think he's seen a stock set up in 15 years ;) ;D