ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: sidekick101 on January 19, 2007, 06:40:26 PM

Title: oil pressure/ boost gauge
Post by: sidekick101 on January 19, 2007, 06:40:26 PM

where is the hole on the enign to putan oil temp gauge and is there any need for a boost gauge on a stocker 1.6l 8V? if so where do you put that one 

Title: Re: oil pressure/ boost gauge
Post by: 1badzuk on January 19, 2007, 11:10:19 PM

theres no need for a boost gauge unless its turbo

Title: Re: oil pressure/ boost gauge
Post by: Rhinoman on January 20, 2007, 06:28:14 AM

To fit an oil pressure gauge you normally remove the stock oil pressure switch and fit the oil pressure sensor instead. You can fit a T piece to allow both to be used. You may need an adapter, the stock switch is an M10x1 thread.