ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: museboy07 on January 22, 2007, 08:26:04 PM

Title: jeep tj coil spacers?
Post by: museboy07 on January 22, 2007, 08:26:04 PM

i was readin around the web and i found that you can use 2 inch jeep tj coil spacers for my 94 track if i cut the center hole to 2.25inch. there alot cheaper then regular spacers for my rig.  can this be done or are these ppl crazy?

Title: Re: jeep tj coil spacers?
Post by: derekj on January 22, 2007, 11:29:08 PM

sky manufacturing sells their coil spacers for $80 for a set of 4 and digger sells his here on the site also. then you dont have to mess around with drilling the other ones.

derek

Title: Re: jeep tj coil spacers?
Post by: Uncivilized on January 23, 2007, 04:54:23 AM

I did it before, but it's not necessary now with the above mentioned. The inside hole needs to be 2.5" not 2.25".

Title: Re: jeep tj coil spacers?
Post by: bzzr2 on January 23, 2007, 08:43:29 AM

i have a heep spacer all chopped down to size in addition to my jdmcrx spacers in the back, they fit well once shaped to size which was done before i received them from another member on the board.

Title: Re: jeep tj coil spacers?
Post by: 2K-Otic on January 23, 2007, 09:42:44 AM

http://bbs.zuwharrie.com/content/topic,52385.0.html

Read the comment from RockMolester.

My personal feelings about the TJ spacers is if you're going through the trouble of reaming out the center hole, why not just go one step further and make your own? In that same thread you will find a post that I put up that describes the process.

That's my 2 cents ;)