ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: tipover on January 26, 2007, 08:03:24 PM

Title: new lift being produced?
Post by: tipover on January 26, 2007, 08:03:24 PM

check this out.  wud ya guys think.

http://cgi.ebay.com/ebaymotors/Suzuki-sidekick-and-Geo-tracker-3-5-suspension-lift_W0QQitemZ220074548994QQihZ012QQcategoryZ33585QQrdZ1QQcmdZViewItem

Title: Re: new lift being produced?
Post by: HotRod on January 26, 2007, 08:12:28 PM

Well, The dif drop Brackets look Okay.
Would there be a CopyRight infringement?
The Square spring spacers and Strut spacers look wierd.
Doesn't correct the rear dif or wheelbase either.
I (personnelly) would say thats about a $300 kit. TOPS.
Welds look like Boogers but I'm no Expert.
For a few bucks more. I'd buy the Calmini.
That may just be me tho.

Title: Re: new lift being produced?
Post by: tipover on January 26, 2007, 08:15:27 PM

Seems a little pricey for what you get.  No springs either.

Title: Re: new lift being produced?
Post by: 96Kicker on January 26, 2007, 08:23:10 PM

iduno anything that is painted kawasaki green I would steer far away from.ha,ha ;D

Title: Re: new lift being produced?
Post by: Mikerpm4x4 on January 26, 2007, 09:27:07 PM

 Nice square tube coil spacers!  ::)

$700 I think that there is a fair amount of profit margin! LOL

Mike

Title: Re: new lift being produced?
Post by: Praise Him on January 26, 2007, 11:36:26 PM

That guy is an Idiot, i have talked to him on the phone, he live outside of portland,oregon near estacada, eagle creek, oregon... I was going to buy some samurai parts off him i found on craigslist, but after the phone call, i could tell he was an idiot, and didnt know much about Shit..

Title: Re: new lift being produced?
Post by: 37kicker on January 27, 2007, 02:03:06 AM

in 4yrs i haven't seen the correct "plastic type"  spacers crack or brake!    stan

Title: Re: new lift being produced?
Post by: honduro on January 27, 2007, 03:28:54 AM

They say you get what you pay for but in this case there is no bang for the buck !!! I've just installed the Calmini 3" suspension lift on my 89 kick and it is top notch all the way .  Even those with limited mechanical skills could install this kit . As for the 3" body lift thats a different story . It is very cheesey and down right awful looking when installed . I'm very surprised that a company who builds top quality products would even sell this to the public . I will be making my own body lift using 2" solid aluminum round stock , drilled and tapped from each end so that it can be spun onto the stud bolts ( attached to the body ) and then bolted thru the frame support from the bottom .     Dennis

Title: Re: new lift being produced?
Post by: bentparts on January 27, 2007, 05:30:12 AM

WOW! For that price he must be really proud of that stuff!