ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TOPIK3900 on February 22, 2007, 06:20:53 AM
-
85 samurai 1.3L i would like a bigger engine and it seems to be sounding like putting a 1.6 in to from a tracker?? how hard is it to do and what kind of mods do you have to do. eg. electrical, vacuum lines etc.
-
easiest way to do it is to find an actual donor vehicle i got a rolled tracker with 130,000 on it for 250 bucks on ebay everything still worked in it too. I ended up using a lot of parts from it also.
-
At the very least try and get all the 1.6 bits and pieces, dizzy, starter motor etc.. I am using all 1.3 parts on a 1.6 engine and not much fits without a little modification here and there. If you're not running a lift and extended bump stops you will need to modify the sump and oil pickup. If you run EFI then a few bucks spent at trail Tough will make life a lot easier. Here in the UK we had a carb 1.6 which makes life simpler.