ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: cuban_b on December 29, 2004, 06:43:24 PM

Title: Cruiser axle on sami
Post by: cuban_b on December 29, 2004, 06:43:24 PM

I'm thinking of putting a cruiser axle on my sami.  Does anyone know how wide they are?  Also, will the sami master cylinder push enough brake fluid for a toy mini truck front and cruiser rear?

Title: Re: Cruiser axle on sami
Post by: TomKat on December 29, 2004, 11:57:15 PM

About 55" wms to wms. i run  a mini front with an FJ-40 rear with discs and my pedal travel is more than normal but not excessive HTH!

Title: Re: Cruiser axle on sami
Post by: hcgalvin on December 30, 2004, 02:17:25 AM

Which cruiser?

FJ40's and 60's are, yes 55-56" ... but FJ80's are 63".

;)

Title: Re: Cruiser axle on sami
Post by: TomKat on December 30, 2004, 03:31:15 AM

Quote

Which cruiser?

FJ40's and 60's are, yes 55-56" ... but FJ80's are 63".

;)

  I thought the 80's were wider after thinking later, but knew you'd pick this up if correction was needed.  ;D

Title: Re: Cruiser axle on sami
Post by: cuban_b on December 30, 2004, 04:45:05 PM

Perfect, that's what I needed.  It's time to start slappin toy parts on the suzuki.

Title: Re: Cruiser axle on sami
Post by: zooky on December 31, 2004, 12:53:50 AM

Cruiser axles work good, the larger size isnt much of an issue unless you do alot of 'technicial' trails. That is what I am currently running on my sami. I am waiting to hear back about a job in Mass. so I might be down-sizing and switching to shaved pick-up axles so I dont have a problem with inspection.

Title: Re: Cruiser axle on sami
Post by: TomKat on December 31, 2004, 04:15:18 AM

Quote

. I am waiting to hear back about a job in Mass. so I might be down-sizing and switching to shaved pick-up axles so I dont have a problem with inspection.

HUH? You got mail...