ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Model Specific Suzuki Forum => Suzuki Grand Vitara, Vitara, Chevy Tracker (Gen. 2 Platform) 1999-2005 => Topic started by: Radler on March 07, 2007, 10:45:25 PM

Title: Quick Question, needs a quick answer, Manual Free Wheeling hubs
Post by: Radler on March 07, 2007, 10:45:25 PM

I have just installed Superwinch hubs on my GV, This may seems like a stupid question but how vital is it to torque up the screws that hold the outer assembly? I don't have a torque wrench that will fit these screws. Hubs are already installed on the vehicle, I just don't want to take it for a test yet with out knowing if the correct torque setting is necessary. I have just tightened them up with a normal allen key wrench, Can someone please advise?

Title: Re: Quick Question, needs a quick answer, Manual Free Wheeling hubs
Post by: ZeusZuki on March 07, 2007, 10:51:45 PM

A drop of lock tight and wind them down nice and tight, that will do fine.