ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TrAkLsI on April 02, 2007, 08:08:57 PM

Title: jeep spacer boring the hole
Post by: TrAkLsI on April 02, 2007, 08:08:57 PM

What is the best, fastest way?    thanks, 

Title: Re: jeep spacer boring the hole
Post by: museboy07 on April 02, 2007, 08:13:16 PM

i just bought some also.  the center needs to be bored to 2.5in.  i used a hole saw made for cutting wood.  armor all is the best lubricant to use also.  i found that out after i did mine. i used wd40 which didnt help at all it just melted the plastic spacer...but it still works...gave me almost 2 in of lift  :)

Title: Re: jeep spacer boring the hole
Post by: TrAkLsI on April 02, 2007, 08:30:52 PM

 I'll try that.  thanks, museboy07

Title: Re: jeep spacer boring the hole
Post by: PHX96TRACK on April 04, 2007, 11:46:32 PM

Museboy is correct, 2-1/2 hole saw works fine for the front. I didn't need to bore the rears I could shove them on. Home depot $6