ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: museboy07 on April 11, 2007, 04:18:47 AM

Title: Camber Bolts...again
Post by: museboy07 on April 11, 2007, 04:18:47 AM

HI i just posted a topic on wheather or not adjustable 1.75 degree - or+ camber bolts would align my track right with the 1.75in coil spacers.  Well i just looked on the package and it said there only adjustable up to 1 degree - or+...now will that be enough to align my track?

Title: Re: Camber Bolts...again
Post by: john1974 on April 11, 2007, 08:39:47 AM

dunno its going to depend on how far out it is... mine when I tossed in muy 3 inch coil springs was off, I got it close but not perfect, after about 50-100 miles of driving it was perfect...

Title: Re: Camber Bolts...again
Post by: museboy07 on April 11, 2007, 11:26:56 AM

did you modify you struts or use camber bolts john?

Title: Re: Camber Bolts...again
Post by: john1974 on April 11, 2007, 11:29:05 AM

nope I used camber bolts, I didnt realize it allrdy had camber bolts in it.. but tossed the new ones in anyway. I only had to do the driverside since the passenger side didnt seem off.

Title: Re: Camber Bolts...again
Post by: john1974 on April 11, 2007, 11:30:17 AM

Also I forgot to add I got the driverside close to inline, but it was perfect... then I drove it a bit and it worked out, must have been due to my springs breaking in...

Title: Re: Camber Bolts...again
Post by: museboy07 on April 11, 2007, 08:22:28 PM

did you just go by looks to see what the camber should look like? or did you get it aligned?

Title: Re: Camber Bolts...again
Post by: john1974 on April 12, 2007, 09:32:19 AM

 Looks, I will be getting it aligned soon anyhow.

Title: Re: Camber Bolts...again
Post by: Jecky4x4 on April 13, 2007, 09:33:01 AM

the company for changes camber/caster up to +-1.75 degrees:SPC
part no': 81250
www.specprod.com

Title: Re: Camber Bolts...again
Post by: BigPig on April 13, 2007, 02:48:23 PM

Quote from: Jecky4x4 on April 13, 2007, 09:33:01 AM

the company for changes camber/caster up to +-1.75 degrees:
SPC part # 81250
www.specprod.com

I got them elsewhere but same product number and they work great on my 5+ inch lift with 31's.