ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: museboy07 on April 12, 2007, 11:26:59 AM
-
How do you modify the lower strut hole to fix camber issues on a lifted tracker?
-
How do you modify the lower strut hole to fix camber issues on a lifted tracker?
The strut bolts to the knuckle with 2 bolts. The top bolt is the on you modify. Here's how I did mine for a 2.25" total front lift:
I removed the top bolt, then pushed the spindle in towards the strut until it stopped.
I used a die-grinder with a good cutting bit, and ovalized the hole till the bolt went back in and through the knuckle.
Done!
I have a thread here somewhere with a few pictures, I'll find it and update later.
-
I just bought adjustable camber bolts and they worked awesome. I searched around the net and found them for only $16 for the set. Priority shipping w/insurance was $9.90, so for $25.90 I got it done quick and easy. Here's a link for the place I bought them. They are sold by a ton of companies as adjustable camber bolts #81250 and the same bolts fit a bunch of applications since you are just going by the bolt diameter. For a Track/Kick it is a 12mm bolt.
http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=81250
-
just go to your local auto parts store. they sell for 20.00 for the set. much easier than messing with a grinder or the internet. (in my opinion)
-
just go to your local auto parts store. they sell for 20.00 for the set. much easier than messing with a grinder or the internet. (in my opinion)
That works too. I couldn't find them locally though.
Tonyman you have any pics of your rig?