ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Amilla on April 20, 2007, 11:16:12 AM

Title: header gasket
Post by: Amilla on April 20, 2007, 11:16:12 AM

Hey i have what looks to be a Tri-Y header, and the gasket it destoryed on it.
I need to get a new one, Does anyone know if i have to get a Tri-Y gasket or will other ones work.  I noticed that some were coming with round port gaskets, and other square.  I know i need the square port, but why are they selling round if there square?

Thanks

Amilla

Title: Re: header gasket
Post by: fullsink18 on April 20, 2007, 11:21:43 AM

Dont know why they are selling round port gaskets.  Just get a stock gasket from advanced auto or similar store.  Just make sure it has square ports before u pay for it.

Title: Re: header gasket
Post by: ROSS on April 20, 2007, 02:27:28 PM

the stock manifold gasket works great. plus it has the heat shields for the plug wires

Title: Re: header gasket
Post by: Amilla on April 21, 2007, 04:05:09 PM

Thats what i just got today, and it works fine.

Ya the added protection of the heat sheilds!  ;D

Thanks for all the info

Amilla

Title: Re: header gasket
Post by: Rhinoman on April 22, 2007, 09:56:47 AM

Quote from: Amilla on April 20, 2007, 11:16:12 AM

Hey i have what looks to be a Tri-Y header, and the gasket it destoryed on it.
I need to get a new one, Does anyone know if i have to get a Tri-Y gasket or will other ones work.  I noticed that some were coming with round port gaskets, and other square.  I know i need the square port, but why are they selling round if there square?

Thanks

Amilla

Some of the aftermarket headers don't have the ends of the pipes squared off.