ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: speedytang on May 01, 2007, 08:41:01 PM
-
I need the bolt tighten sequence. I do remember that it is 54ftlbs but don't own a Tracker book since everything is of simple design. Thanks.
-
might track down acks web site and see what he has. Lots of info on it.
found it
http://www.acksfaq.com/
-
I have tried that site and all I get is a error when searching.
-
go to your local auto parts store and buy a chilton or haynes manual.
thats the first thing i did when i got my sammi.
it gives you everything you need to do anything.
-
Those repair manuals are a waste of time. They are such a simple design and all I need is the head bolt torque pattern not worth the $20 for one item.
-
They often stock chilton and haynes repair manuals at the library if you don't want to throw down for one...
-
No auto part store has the Tracker repair manual and the library was a bust also. Can some scan the bolt torque pattern for me. I am pulling the head in the morning and still need the pattern. Thanks
-
if they're a waste of time . why do you want information out of them???????????
if I get a chance tomm. i'll scan and post it for you
-
AFAIK all torque patterns are the same, you start with the inner most bolts and then work outwards in a diagonal pattern. It doesn't really matter which ones you do first as long as you follow that pattern. Torque the bolts down a bit at a time and then repeat the sequence. The Track/Kick manual is downloadable at :
http://www.suzukiinfo.com
The torque setting is 51-54ft.lbs. It is important to note that the threads on the bolts should be given a thin coating of clean engine oil. If you don't do this you won't get the correct torque.
-
Thank You, At least someone is of help.