ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: john1974 on May 13, 2007, 04:07:26 PM
-
I am in the process of removing my rear diff in my 94 tracker. Ive done it before on sammys.. this may be cause i am worn out from the weekend, but I have the axle shafts pulled, the diff nutz removed and I cant get that thing to break loose...
Any ideas would be helpfull.
-
Maybe try jacking up on the front of the housing?
-
You might have to put the top mount back on and then put a couple of nuts back on the bottom of the third member a couple of turns from bottoming out and jack the front of the flange up.