ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bus_driver on May 28, 2007, 08:23:36 PM
-
ok got the front spacers in did the strut mount flip and new CV's took a bit of time about 6 hours for the front and 2.5 for the rear but i used 1.25 front and 2. rear and crown vic shocks and stock front struts.
still have to grind the front strut holes for the camber but i do not have to drive too far so i am not too worried for now. i also left the sway bar off and man does that make a big difference.
will put pics up as soon as the light comes back out. am glad i did only 1.25 for the front since it is still really flexible and cv's look a good angle. will take a pic of them as well.
thank you every one and especially BFM since he had extra spacers that i used.
thank you Crikeymike for the tips
thank you everybody else who have helped out.
too bad this was not zukitoronto so we could all go wheeling one day together but i do like being part of a world organization
-
Good to hear. :D
-
Re: 2 inches is nice
Where are the ladies who think that way?
-
Re: 2 inches is nice
Where are the ladies who think that way?
BWAHAHAHA!!!
-
i can't even do a nice thread without it turning so dirty!! haha
-
here are the pics