ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: daddyizzle on May 29, 2007, 07:54:28 PM

Title: sammy transfer case question
Post by: daddyizzle on May 29, 2007, 07:54:28 PM

If a sammy transfer case pops out of gear, will a rebuild solve this or are there  parts that you need to buy in addition to the standard rebuild kit to solve that problem?

-Adam

Title: Re: sammy transfer case question
Post by: mrfuelish on May 29, 2007, 08:39:59 PM

Watch the shifter and give it some gas and then let off while driving and see if it moves forward and back, if so you might want to look for a new one.

Title: Re: sammy transfer case question
Post by: ROSS on May 29, 2007, 08:49:23 PM

does it have a body lift???  broken t-case mount???  maybe hitting the floor???

Title: Re: sammy transfer case question
Post by: Drone637 on May 30, 2007, 09:05:27 AM

Usually it just needs a new plastic bushing for the shifter sheet doesn't it?

Title: Re: sammy transfer case question
Post by: daddyizzle on May 30, 2007, 09:41:21 AM

Not mine but I had a previous samurai that would jump out of 4 wheel drive but not out of 2 wheel drive. This is actually one that a guy says needs rebuilt and needs what ever is broke fixed since it was jumping out of gear. I think his words were that you would need to replace the broken part that makes it jump out of gear. I would think it would just be the bushing if the mounts were all good myself.

-Adam

Title: Re: sammy transfer case question
Post by: mrfuelish on May 30, 2007, 11:00:07 PM

There is a fix for the four wheel drive part poping out, it is about 100.00 or you can use a washer behind the bearing and turn the collar over.It's the part behind the front out put.