ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Zuki One on December 05, 2004, 01:07:01 PM
-
Its a 91 4dr with 42,000 orig miles with some nose damage it was literaly an old womans rig!Its got the1.6EFI it is the first year of the 4dr$700 tape and cd changer.SO now its time to get started on the SAS i need info feed it tome everyone i have a stock sami axle setup ready and all my YJ springs what else do i need anyone Heather! Brian!anyone ERIC ;D
-
Cool  8) 8) 8)  Welcome to the club  :D
Can't wait to see the winter project action :o
I got another one too.  1991 4dr 5spd 4wd ac & ps.  Ofcourse this one is about 100K more miles then yours.
(http://photos.zuwharrie.com/users/whitfimb/1203047.jpg)
(http://photos.zuwharrie.com/users/whitfimb/1203042.jpg)
(http://photos.zuwharrie.com/users/whitfimb/120304.jpg)
-
To begin with, here is the short list;
SYE/Kicker3 or equiv.
300-400 series Mercedes steering arm(s), slighty modified.
Extended drivelines.
Extended brake lines.
Spring hangers.
Shackle hangers.
Spring perches.
Shock mounts.
-
And if it's an auto..
get some 5.12's. :)
-
I have a question. If you are going to do a SAS why not go with Toy axles? They are way stronger and the swap would be almost identical. Just a query. ???
-
Toy truck axles are about 1 1/2 -2" narrower on each side so about 3-4" narrower overall. This would require wheel spacers to get the same width..
So you could do it I suppose.
We went with FJ80 axles for that reason. We didn't want to go narrower. FJ80 axles are about 3" wider on each side, so about 6" wider overall than a sidekick axle.
Your sammy axle will require wheel spacers to get it to the same width as a sidekick, or you'll need to extend one side and get a custom axle shaft.
I can understand the importance of wanting to stay Suzuki though!. :) We did for the longest time.
Heather
-
why not go with coil springs and a four link? nice solft ride and not much more fab. got my first one done in a weekend.working on my 4th, :)
-
Show me some pics and and a parts list? please
-
why not go with coil springs and a four link? nice solft ride and not much more fab. got my first one done in a weekend.working on my 4th, :)
yea, mabey some prices and photos would get us going.
stu
-
tell ya what when i get my fab done ill take some picts.and see if i can figure out how to post them ,ive ben pretty busy lately,and when im not the weather is sh***y. if you like what you see i can mail some parts ,mounting plates, for whatever material and what the time to cut them ,$1.00 a minit is what my company charges me to use the lazer cutter.and as good of directions as i can give you. parts list will consist of 1 1/8 120 wall DOM tube ,two 3/4 " heim joints(cheepest on ebay when they have them ,usally sold in 4s)two high missalinment bushings,coil springs out of a 914 porsche,i think vw super beetel springs will work to. and i use 4 samauri replacement bushings(on ebay). i bout 4,36'' pieces of DOM yesterday for $65.00.
not gona get to work on it thisweekend eather.goin to kansas rocks.was told their toys for tots is this weekend. :)
-
.....snip..... not gona get to work on it thisweekend eather.goin to kansas rocks.was told their toys for tots is this weekend. :)
I'll be there in my -7 with my 2 kids. I'm on the BOD for the park.
-
ill be riding bitch in a red sammy :P