ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bus_driver on June 04, 2007, 12:23:58 AM

Title: front camber Q
Post by: bus_driver on June 04, 2007, 12:23:58 AM

what is the camber from stock on my 92 kick .... i did the spacer and now i am about too grind the holes  b4 the lift it looked like 0 degrees or really close if someone could let me know that would be great. and if i do it at 0 and then the toe at 0 would that be ok i use to run 0 toe on one of my cars and it gave me under steer and then massive oversteer but that was a track racer and dd it also was runing 1.25 negative on the camber. so i guess my Q is 0 camber and toe is this ok.

thank you

Title: Re: front camber Q
Post by: bentparts on June 04, 2007, 03:42:15 AM

That's pretty much how I set my Tracker up after I did the lift. 0 and 0. I think it ended up with about 1/16 th " toe in after it settled. Drives good.

Title: Re: front camber Q
Post by: Rhinoman on June 04, 2007, 04:52:26 AM

STEERING
Toe In 2-6mm (0.08-0.24in)
Camber Angle 0 degs 30 mins
Caster Angle 1 deg 30 mins

Title: Re: front camber Q
Post by: bus_driver on June 04, 2007, 08:16:58 AM

geat thank you very much that is will be easy to achieve at home appreciate the info.