ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: The Dog on June 14, 2007, 09:18:08 AM

Title: factory tool kit location
Post by: The Dog on June 14, 2007, 09:18:08 AM

I searched for this and didn't find anything. I was wondering where the factory tool kit for an '87 Samurai is located?  I found the jack crank under the driver's seat. 

Thanks

Title: Re: factory tool kit location
Post by: Amilla on June 14, 2007, 09:21:15 AM

I didnt even know that they had a factory tool kit.
On my 88 the jack crank was with the jack under the hood, not sure if thats the original place it was kept thou.

Sorry for the useless post
Just didnt know about the tool kit


Amilla

Title: Re: factory tool kit location
Post by: ack on June 14, 2007, 04:41:42 PM

The jack should fit in a bracket under the driver's seat. The tire tool fits in a snap clip just in front of the jack.

Strangely enough, My Samurai came with an very small toolkit (I am the second owner) that I found in the glovebox.

Hope this helps!

Title: Re: factory tool kit location
Post by: locjaw on June 14, 2007, 08:35:50 PM

let me see here, what would be in a samuari tool kit ?????

item 1...... impact phillips screwdriver
item 2...... 2 each  10/12 combination wrenchs
item 3...... 14/17 combination wrench
item 4...... 2# mini sledge hammer


thats it , nothing else needed ;D ;D ;D
jason