ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Bandit02 on June 23, 2007, 04:41:16 PM
-
I ordered a set of Jeffs spacer and put them on today. 1.5" in front and 2" in back. I did the strut mount flip and installed the Crown Vic shocks in the rear.. It was an easy and straight forward process... It's actually measuring about 2.5" of lift at every corner, but I'm sure the suspension still needs to settle back in. Let me know what you guys think... Now I just have to decide if I'm gonna run 31's or do the 2" BL and get the 32's I really want.
And if anyone has an interest in buying a set of spacers, contact Jeff1997. They are amazing in quality, and fit perfect... Thanx Jeff!
Before
(http://i37.photobucket.com/albums/e55/Streetblazin/Feb172007148-1.jpg)
After
(http://i37.photobucket.com/albums/e55/Streetblazin/cars007.jpg)
(http://i37.photobucket.com/albums/e55/Streetblazin/cars006.jpg)
-
hell ya man looks good...i got jeffs spacers too...good stuff...but if i were you i'd go with the 2in bodylift and 31s....if you were to put 32s on you would definately need to re-gear your differentials or that thing would just dog goin down the highway...but nice lookin rig man...you get your camber aligned yet?
-
please tell me thats not a ford emblem on the front
-
please tell me thats not a ford emblem on the front
It sure is.
Must be a Die hard Ford fan with Dreams that they built the Kick.
I'd love to have a Kick like that again
(without the flames)
Looks really sharp and Shinie ;D
-
it may say ford, but he corrected for that with the hooters plate
-
museboy: Nope, cambers not done yet, I decided to drive it for a day or so to let the suspension settle in before I adjust it, it's not off by very much though.
Yeah, that is a ford Emblem. I like any good vehicle, but I was raised on fords, and since the geo emblem has a chevy BowTie in it, I decided to ditch it, especially since the ford emblem just fit perfectly into the same place the Geo emblem did. It's also to mess with my brother in law who is a HUGE chevy fan, so this is to just tease him a bit.... Hey, I wish Ford would have built this, I haven't driven my 02 f150 for over a month, I like driving the Tracker too much!! ;D
Thanks for the compliments HotRod, I appreciate it...
The hooters plate is a classic. It's bent and beat all to crap because it's been on nearly every vehicle I've owned over the last 6 years. lol..
Do you guys really think that the 32's will bog me down too much? I figured with the 5.XX's in the axles it would be fine. I know the owner of Shrockworks runs 32's on his auto tracker and he says it does great.
-
Yeah, that is a ford Emblem. I like any good vehicle, but I was raised on fords, and since the geo emblem has a chevy BowTie in it, I decided to ditch it, especially since the ford emblem just fit perfectly into the same place the Geo emblem did. It's also to mess with my brother in law who is a HUGE chevy fan, so this is to just tease him a bit.... Hey, I wish Ford would have built this, I haven't driven my 02 f150 for over a month, I like driving the Tracker too much!! ;D
Of course, if Ford HAD built it....anh, never mind...
-
Do you guys really think that the 32's will bog me down too much? I figured with the 5.XX's in the axles it would be fine. I know the owner of Shrockworks runs 32's on his auto tracker and he says it does great.
[/quote]
I would think so...mine kinda boggs with just 235s on it. but my engine is gettin kinda weak too...you could always go with 32x10.50 and get some 15x8 aluminum rims. That way they'd be nice and light
-
Do you guys really think that the 32's will bog me down too much? I figured with the 5.XX's in the axles it would be fine. I know the owner of Shrockworks runs 32's on his auto tracker and he says it does great.
I would think so...mine kinda boggs with just 235s on it. but my engine is gettin kinda weak too...you could always go with 32x10.50 and get some 15x8 aluminum rims. That way they'd be nice and light
[/quote]
I intended on some 32X11.50's on a 15X8 steel rim, but I ran across a set of aluminum's today for a decent price, so I might go that route to save on some weight.. My motor runs super strong, considering it's HP rating
-
Thanks guys for the good comments on my spacers. I'm glad they worked and your ride looks great. Seriously? a Ford emblem? I mean Suzuki's are great but do not try to class them up with a Ford logo.
-
I installed Jeff's spacers this weekend on my Escudo, too.