ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bandit86 on June 26, 2007, 02:09:05 PM
-
I put a new sennding unit in, same problem, idi pull the lead off the temp sending unit it shows cold, if i put it on it shows hot, regardless of engine tempt.
gas sending unit supposedly replaced by mechanic I got the tracker from, was not connected, I plugged it in but stilll shows empty i think... Any words of wisdom? What is the sending unit resistance supposed to read?
previous owner was a young lad, had underbody lights hooked up, rear bench butchered for subwoofers, aux power outlets and a load of other gadgets hooked up, probably tied something into the wrong wire - I could power my readio from the fuel gauge for all I know