ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Samurai47 on June 28, 2007, 05:16:51 PM

Title: S10 Blazer Flares
Post by: Samurai47 on June 28, 2007, 05:16:51 PM

Anybody got S10 blazer flares on their samurai? Im lookin for a fender flare that will open up the wheel well a little and still look good but i cant weld or id make me some. Any suggestions would be great. Thanks.

Title: Re: S10 Blazer Flares
Post by: speedball1981 on June 29, 2007, 02:13:41 AM

 i used the stock samurai flare,  I just chopped the wheel well in the front,  and in the back and tilted the flare back in the front and forward in the back,  if ya know what i mean...  for an idea,  i have a spoa,  and my front flare/fender is level with the top of my 31 inch tire...
good luck
p.s.  i used sheet metal screws to hold the flares on...  if your careful it'll look  good...
(measuring)

Title: Re: S10 Blazer Flares
Post by: BigRedZuki on June 29, 2007, 10:10:52 AM

what would work on a sidekick for flares

Title: Re: S10 Blazer Flares
Post by: Drone637 on June 29, 2007, 02:52:24 PM

A couple of us use the default flares from Harbor Freight.  If you do a search for Tracker Flares you can find a couple of shots.  Hot Rod probably has the best examples.

Title: Re: S10 Blazer Flares
Post by: HotRod on June 29, 2007, 08:46:52 PM

Quote from: Drone637 on June 29, 2007, 02:52:24 PM

A couple of us use the default flares from Harbor Freight.  If you do a search for Tracker Flares you can find a couple of shots.  Hot Rod probably has the best examples.

Thanks
and Cheap too ;)
3"inch heavy duty NO wire.
http://www.jcwhitney.com/autoparts/Product/tf-Browse/s-10101/Pr-p_Product.CATENTRY_ID:2008750/p-2008750/N-111+10714+600013139/c-10614
(http://i109.photobucket.com/albums/n66/amandaplaywith/2drwithBFGs24x6.jpg)