ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Trackin92 on July 08, 2007, 09:38:48 PM
-
So a few months ago I ordered 1.5" coil spacers and once I recieved them I threw them in a box and didnt bother with them at all. Well I have all of a sudden gained some motivation to put them on. Right before I posted this topic I was looking for strut spacers for a Tracker but not a bit of luck. Anyone have any good links of to where I can get a pair? As the same for longer shocks in the rear. Are Rancho shocks any good?
any info would be great thanks.
-
well i did the strut mount flip and that took care of the front with a good amount of flex after removing the antiroll bar now i only have `\1.25inch spacer on the front and 2 on the rear this is a perfect 2 inch total lift .... i already had the mid 90's crown victoria shocks on the rear but i needed to space them down after the lift to actually get the springs to droop properly. you might want to check the ford e150 shocks first as they might be a little longer. all in all givin that these are only spacers it actually works really well and even tho i have not done my camber adjustment which will be a grinder job it rides nice and looks good with the 29 inch tires
-
i make a allu. strut spacers. if interested pm me.. stan
-
Try AC Delco part #520-219. That is what some guys use with my coil spacers.
-
i make a allu. strut spacers. if interested pm me.. stan
e-mail me at lambo84|removethispart|@hotmail .com I wants some strut spacers