ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mlovetripp0 on July 22, 2007, 03:18:30 PM

Title: oil and water temps specs
Post by: mlovetripp0 on July 22, 2007, 03:18:30 PM
on a 16v 1.6
what is the idle oil pressure after warm up ?
what is the idle water temp after warm up and how much higher does it nomally go?
Title: Re: oil and water temps specs
Post by: geeeeoooo on December 25, 2007, 05:35:12 PM
just wnted to bump this up....mine is a 95 16v...been searching, but cant seem to find oil pressure specs....
Title: Re: oil and water temps specs
Post by: bentparts on December 26, 2007, 03:46:10 AM
95 16v, oil pressure at idle after warm up 26-27lbs, 60 lbs at highway speeds or anything above 3000 rpm. I'm using a 180 degree thermostat with the turbo, and temps are consistantly slightly left of center on the temp guage. Hope this helps.
Title: Re: oil and water temps specs
Post by: geeeeoooo on December 26, 2007, 05:14:04 PM
mines got almost that exactly...was just wondering what it should be.....but after i bumped this post i researched in my chiltons (CHARMIN) manual...it said 46.9-60psi |removethispart|@ 4k....so im happy....just put my gauge in and aws wonderin the specs...thanks!
Title: Re: oil and water temps specs
Post by: bentparts on December 27, 2007, 04:25:47 AM
" Charmin" manual, hahaha, that's funny!
Title: Re: oil and water temps specs
Post by: geeeeoooo on December 27, 2007, 06:42:04 PM
i dunno if i would even degrade charmin that bad by calling them manuals that...more like the cheep store brand T-P....not the fluffy stuff....