ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: dan_b_grcc on August 06, 2007, 09:18:17 AM

Title: Leaf Springs in SAS setup
Post by: dan_b_grcc on August 06, 2007, 09:18:17 AM

Hello,
  What kind of leaf springs are some of you guys using with your SAS setups for Tracker/Sidekicks?  I am wondering about using some rears from a Chevy S-10 or Ford Ranger, just because of there smaller length. Any ideas or advice? Just curious what others have done. I have seen some information on the axles here, but not much on the leaf springs. I plan on using Dana 44's from a Jeep Grand Wagoneer. Thank you

Title: Re: Leaf Springs in SAS setup
Post by: whateverworks on August 06, 2007, 07:06:04 PM

I have seen both 4pack and 5pack jeep yj leafs being used with great success

Title: Re: Leaf Springs in SAS setup
Post by: trailturd on August 06, 2007, 09:33:37 PM

I am using 5-leaf pack YJ's. They work pretty well.

Title: Re: Leaf Springs in SAS setup
Post by: dan_b_grcc on August 07, 2007, 04:16:08 PM

Thanks for the response guys. What axles are you running with them? Do you have pictures by chance?

Thanks!

Title: Re: Leaf Springs in SAS setup
Post by: whateverworks on August 07, 2007, 09:31:40 PM

Most guys set em up with Toyota axles.
Kelly

Title: Re: Leaf Springs in SAS setup
Post by: hcgalvin on August 08, 2007, 07:06:48 AM

See signature. Go to links in said signature.  ;)

Title: Re: Leaf Springs in SAS setup
Post by: 95tracker on August 08, 2007, 07:45:32 AM

I am in the process in a SAS with 4 pack Yj leafs, and i am using a CJ Dana 30, the axle is about an inch narrower than the tracker track width but it was free, and a lot easier for me to find than Yota axles.

Title: Re: Leaf Springs in SAS setup
Post by: dan_b_grcc on August 08, 2007, 12:03:21 PM

Thank you for the replies, girls and guys.


 :)