ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TrakJD on August 12, 2007, 08:36:44 PM

Title: main/rod caps torque specs???
Post by: TrakJD on August 12, 2007, 08:36:44 PM

I'm rebuilding the 1.6 8v motor, crank is .10/.10 and did the plastigage, its a little bit over the limit.  And I checked the torque on hayne it has only the 1.3 and 1.6 16v spec sheets.  Chilton too.  So... if anyone's willing to post the torque specs for 1.6 8v.  I would be greatly appericated.

Thanks

Title: Re: main/rod caps torque specs???
Post by: Rhinoman on August 13, 2007, 10:10:56 AM

FSM states 24 - 26.5 lb-ft for bearing caps. 36.5 - 41.5 lb-ft for main bearings.

Title: Re: main/rod caps torque specs???
Post by: TrakJD on August 13, 2007, 11:43:53 AM

Thanks Rhino!