ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: SnoFalls on November 22, 2004, 04:25:33 AM

Title: Stock shock specs
Post by: SnoFalls on November 22, 2004, 04:25:33 AM

Does anyone have the specs on the stocks shocks of a trac/kick handy. (I know I can just pull one of mine easily, but if someone else has it ...)

I'm looking for ...
travel
extended length
collapsed length

Thanks

Title: Re: Stock shock specs
Post by: nevadasmith on November 23, 2004, 03:10:59 PM

I don't have the yet but am in stalling my new lift wich came with new back shocks and would mesure up the old ones when I take them out and if you'd like i'll enven giv to the specks on my new ones, but won't be till thurday night!

Title: Re: Stock shock specs
Post by: nevadasmith on November 24, 2004, 01:35:38 PM

The factory rear shocks mesure 13" compressed and 20" at full extention 7" travel

my new doestech shocks mesure 17"compressed(against the bump stop on the shock) 24" fully extended 7" travel(mabey 8 1/2" with the bump stop compresed)

I for got to mesure the diam. and width of bottom loop other wize I could poast the napa p/n for the doestech equivilant.

Title: Re: Stock shock specs
Post by: nevadasmith on November 25, 2004, 03:49:59 AM

The part number for the napa shock is RR 94058 and will fit a tracker with 2-3" lift they sell for about $12.50 each and have 9.5" travel wich is an inch more than my new long travel doestechs that are to stiff

Title: Re: Stock shock specs
Post by: SnoFalls on November 25, 2004, 04:53:25 AM

cool, thx loads ... I'll probably take those numbers down to napa this weekend.

Title: Re: Stock shock specs
Post by: nevadasmith on November 25, 2004, 05:56:26 AM

let me know how ya like em I'm thinking about diching the doestechs for em