ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RHodge on August 26, 2007, 12:03:49 PM
-
after many months of work I finally am drawing to a close with my Samurai (For Now)
the Rear stinger and bumper are just about done, one more tube under the tail lights and some paint
(http://i128.photobucket.com/albums/p185/hodge60/P8260139.jpg)
(http://i128.photobucket.com/albums/p185/hodge60/P8260138.jpg)
(http://i128.photobucket.com/albums/p185/hodge60/P8260137.jpg)
Should have plenty of ground clearance :)
Ryan
-
very nice looking, how long have you been working on that?
What lift and size tires are those?
Amilla
-
Thanks ,started before last fall, had a few changes here and there
the lift is just a spring over . the tires are 31-11.50-15 on 15x8 wheels 2.5 bs
Ryan
-
Looks cool!!! 8) Does it fold down or pivot in any direction? That gives you a nice place for a full size spare!!! nice work!
-
Looks cool!!! 8) Does it fold down or pivot in any direction? That gives you a nice place for a full size spare!!! nice work!
Thanks
It folds down , still clears the tailgate to
Ryan
-
closeups?
-
A different look, I'll give you that. What are you doing for the front? :)
That front seat looks kind of familiar though... probably because I have it in blue. :P
You might want to move you license plate backing to inside the stinger though so it's protected. Otherwise you might scrape it off when you back into something.
-
A different look, I'll give you that. What are you doing for the front? :)
I shall be using a shrockwork center winch section and build my own stinger off that, havn't bought it yet should be soon I'll post pics of that as I build it
Ryan