ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: geeeeoooo on September 17, 2007, 09:26:06 AM
-
jeff1997....do you make any of these?? im totally happy with my 2", but wanna jack the |removethispart|@$$ up a bit more to look level with the front, and new coils are just too much money.....agin....im only lookin for the rear set....
-
if you go with 3" you will need a bump stop spacer to holdthe spring in place. if he doesnt make them i can. stan
-
really....why do you need a bumpstop spacer to hold it all together?? the 2" spacers that i got from him have a lip on the top to hold the spring on there....i understand what your saying about the bumpstop, thou....i extended mine on the axle.....but is it really needed??
-
another question....is an spacer needed for the top joint on the rear axle with a 3" spacer, or will it bind?? what else am i missing??
-
and another thought.....i can get used springs for 20 bones at a local junkyard off of a 4 door....would this combined with the 2" spacers give me the same lift as 3" spacers?? which would be less hassle??
-
geeeeoooo, I emailed you back, 37kicker is rightabout the bumpstops. My spacers do have a lip but it is only .5" tall, I personally would not trust only that to hold my springs in place. By the way to anyone else out there, I can make ANY size spacers you want, it just may not be the safest thing to run with!!
-
Well they would still be the same hassle, cause you would still have to remove the spring. If you want to keep a decent ride in the rear go with a 3in spacer but if you don't mind a harsher ride then go with the 4door springs...and yes you will need a rear-arm spacer because that will provide flex and keep the ride smoother. Plus if you don't use a spacer on the rear a-arm then it could end up busting due to the angle it would be at all the time. Don't forget longer shocks too..
-
Good call museboy, I forgot about the shocks. You will need longer ones and an arm spacer as well.
-
so my crown vick shocks arent going to be long enough?? and i didnt extend the upper part of the bumpstop, i extended the lower portion on the axle, so the lip on the spacer holds mine together now with the 2" spacers...would the 3"ers be more dangerous this way?
-
well, im totally at a loss, and any opinions would be greatly appreaciated...or however thats spelled...lol....i dont know wheather to put on 3" spacers, super glue a 1" spacer to my 2" spacers already in, or to get some junkyard 4 door springs for my 2 door....what would you guys do?? this vehicle is basically my playtoy, not too many paved roads seen with it, but i want something thats going to be streetable.....any opinions??