ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Luke on October 06, 2007, 07:56:38 AM

Title: DriveLine Spacers
Post by: Luke on October 06, 2007, 07:56:38 AM

Does anyone have an opinion on where to put these spacers, transfer case or axle ?

Title: Re: DriveLine Spacers
Post by: AJMBLAZER on October 06, 2007, 08:44:22 AM

Mine is at the axle.  Gives me no issues.

Title: Re: DriveLine Spacers
Post by: Drone637 on October 06, 2007, 10:28:18 AM

I did the axle as well.   It's taken a few hits but never had any issues.  Make sure your spacer isn't to long or you will do damage to your transfer case mounts.  :)

Title: Re: DriveLine Spacers
Post by: MKOLSEN22 on October 06, 2007, 11:36:44 AM

I placed mine at the axle end on my Tracker, but that is the only place that I could put it due to the slip joint at the t-case end.  Here is a link to what I did.

http://bbs.zuwharrie.com/content/topic,66504.msg704865.html#msg704865 (http://bbs.zuwharrie.com/content/topic,66504.msg704865.html#msg704865)

Mike

Title: Re: DriveLine Spacers
Post by: norcalwreckchaser on October 06, 2007, 09:37:50 PM

My Sami has a single spacer at the T-case and front axle been there since 2000 when they came with my Calmini 5" lift no problems

Title: Re: DriveLine Spacers
Post by: RHodge on October 06, 2007, 09:46:13 PM

mines at the axel also , but I going to move it to the t-case, keep rubing it on rocks

Title: Re: DriveLine Spacers
Post by: S.Sidekick on October 07, 2007, 10:58:31 PM

ya mine didnt fit, so i called calmini and they said if it causes binding dont put it in.  and havent had any probs...