ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: explosivo on November 15, 2004, 02:01:19 PM
-
I think I'm starting to get a more solid idea of what direction I'm going to take what's left of my Tracker body in next:
(http://www.eye-irritant.com/august2004/tracker_pickup.jpg)
I figured that what's left of the rear portion is pretty rotted out, so why not lop it off, eh? :P I really dig the green SAS'd rig here:
http://www.cs.umass.edu/~glenn/personal.html
Except I wouldn't be making a soft top for it.
-
Your such a artsie person ;)
looked like the wheel was streched alittle bit.
looks like a really short p/u.
-
Oh yeah, I plan on stretching the wheelbase out a bit as well... when I get 'yota axles and a Sammy t-case... gonna need the extra room ;D
-
that looks pretty cool
-
I'm likin' it ;D
-
Im still toying with that idea with the samurai. My rear fenders are junk but im not sure. i like the look and idea 8).
-
Yeah, there's some spots on it that are really rusted out... the entire floor in the cargo area will probably drop out if I were to leave it in for a year or two :o
-
MMMMM, Michigan. Gota love it ;).
-
You already chopped the back off, you might as well keep chopping!
I like it!
Cwkick
-
([url]http://www.eye-irritant.com/august2004/tracker_pickup.jpg[/url])
Git R' Done! are you going to buy a tubing bender?
stu
-
i was thinking about doing this but then i couldn't put te seat back to sleep in it. :-/ once and a while we have to sleep on trail and i like to be cozy. hum maby i'll just build a space behind the seat to recline it?
stu
-
and useing handy-dandy paint:
(http://www.eye-irritant.com/august2004/cuttracker.JPG)
stu
-
Cool, I like it, did you mention anything about a small flat bed on the back too???? It could come in handy for carrying you stuff around with you ;D
-
Git R' Done! are you going to buy a tubing bender?
stu
Have had a Harbor Freight tube bender for about a year and a half now... figure I might as well take advantage of it ;)
i was thinking about doing this but then i couldn't put te seat back to sleep in it. :-/ once and a while we have to sleep on trail and i like to be cozy. hum maby i'll just build a space behind the seat to recline it?
stu
I'm not concerned with that, considering I can't sleep in a reclined Tracker seat (far too wide and a bit too tall ;)).
Cool, I like it, did you mention anything about a small flat bed on the back too???? It could come in handy for carrying you stuff around with you ;D
Yeah, I'll be building a flatbed into the back... probably make it out of wooden planks just because I like that look ;)
-
on Today at 9:22am, 1bigtracker wrote:i was thinking about doing this but then i couldn't put te seat back to sleep in it. once and a while we have to sleep on trail and i like to be cozy. hum maby i'll just build a space behind the seat to recline it?
stu
Thats why I'm changing to a 4dr ;D
-
hotrod good idea, take all the seats out and pefect for sleeping in
-
hotrod good idea, take all the seats out and pefect for sleeping in
I think I'll leave the front seats in though. ;)
I had the back seats out and was totally able to recline the seats and doze off.
-
Have had a Harbor Freight tube bender for about a year and a half now... figure I might as well take advantage of it ;)
Just a heads up on the harbor frieght tubing bender, it's not bought one my self and its a pipe bender(more like a pipe smasher) it kinks tubing more than it bends it, but, willams low buck tools sells a very nice econmy tubing bender and it works well!
-
Have had a Harbor Freight tube bender for about a year and a half now... figure I might as well take advantage of it ;)
Just a heads up on the harbor frieght tubing bender, it's not bought one my self and its a pipe bender(more like a pipe smasher) it kinks tubing more than it bends it, but, willams low buck tools sells a very nice econmy tubing bender and it works well!
Someday I'll get a decent bender. This one seems to work fine on thick tubeing... I have tried to crush--er--bend some exhaust pipe with it, and it didn't work out too good ;D
-
Nice to know this info on the tube
crusher bender ;D
-
Nice to know this info on the tubecrusher bender ;D
Who actually needs an exhaust system anyways? Anything added after the manifold is for pussies ;D
-
Who actually needs an exhaust system anyways? Anything added after the manifold is for pussies ;D
ahahahahaha lol ;D ;D ;D ;D