ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 87 sammi on October 16, 2007, 07:28:44 PM

Title: Trak breaks to a Samurai?
Post by: 87 sammi on October 16, 2007, 07:28:44 PM

I just bought a 97 trak with a 1.6 in it to do the swap to my 87 samurai and i want to use as many parts off it as i can. Does anyone know it the breaks ( calipers, drums, rotors...) will match up on my Zuk axles??

THanks All!!

Title: Re: Trak breaks to a Samurai?
Post by: DistantSmoke on October 24, 2007, 04:11:51 PM

I tried the calipers from a 89 tracker onto an 87 sami front and they do not fit. the bolt holes would line up if the caliper didn't bottom out on the top of the knuckle first.

Title: Re: Trak breaks to a Samurai?
Post by: Yankee-Tim on October 26, 2007, 07:18:11 AM

I'm doing it right now.  4dr Kick fronts on the Sammy.  They fit, but come real close to the king pin bolts.  Also, I had to remove  good deal of material from my hi-steer arms to make it work, and do a slight bit of grinding to the caliper.

Others are running Kick brake upgrades without problems.  If you run Sammy calipers in the rear, this helps get proportioning bacj=k