ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: sidekicksrock on October 20, 2007, 12:53:31 PM

Title: Engine disassembly question
Post by: sidekicksrock on October 20, 2007, 12:53:31 PM

I am replacing the front seal on lil Suzy and need some advise. I am having trouble getting the 17mm crankshaft bolt out to get to the seal. Two questions, 1, Which way does the bolt come off clockwise or counter-clockwise? 2, How do you hold the engine from turning while you break loose the bolt? Putting the vehicle in gear with the brake on does not work. I can't see any way to hold it at the flywheel. Suggestions? My wife (soon to be EX) has buried my factory service manual in the attic somewhere and I can not find it. So I am working with a downloaded Haynes manual and it is of very little help. Oh, she is a 89 with a 1.6 8V

Title: Re: Engine disassembly question
Post by: ROSS on October 20, 2007, 03:52:57 PM

I broke mine loose with an electric impact.  standard thead.  lefty loosy,  righty tighty.
some of them have thread locker on them.

Title: Re: Engine disassembly question
Post by: sidekicksrock on October 20, 2007, 04:56:20 PM

Thanks, I apreciate it, I got it loose, I used a chain grip tool and a 14" breaker bar, worked great.