ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 87 sammi on November 01, 2007, 09:58:33 PM

Title: I NEED HELP!! wiring harness question!!
Post by: 87 sammi on November 01, 2007, 09:58:33 PM
I am in the middle of swapping a 1.6 8v kick motor into my 87 sammy and i have no idea what to do when it comes to the wiring harness and computers of the two rigs. I have all of the harness and the computer out of my donor and now im confused as to what would make more sense...

 Do i completely swap the harnesses and computers to make things easier or do i start splicing things to make one harness from the 2?

Also, i have read that some people out there will do the wiring for you if you send them the 2 harnesses, is this worth it and if so where could this be done?

Please help ??? ???
Title: Re: I NEED HELP!! wiring harness question!!
Post by: luvmysammy on November 01, 2007, 10:02:08 PM
get ahold of a man named FLETCHER on here. he's sleeping now, he works early mornings, but u can send him a pm. he's almost done with hes swap, and it looks good. he can tell u all u need to know. hope this helps, u can find some of his posts in the zUKTAH forum on the bottom of the home page. just look for his name, "fletcher" and send him a pm. he'll get to u asap. hope this helps.
Title: Re: I NEED HELP!! wiring harness question!!
Post by: tracker8v4x4 on November 02, 2007, 07:52:52 PM
i would prolly swap the whole harness the only thing i dont know is how u are gonna wire the fuel pump prolly eaiser just to splice the fuel pump and tail light wires
Title: Re: I NEED HELP!! wiring harness question!!
Post by: tracker8v4x4 on November 02, 2007, 07:57:38 PM
i swapped the whole wireing harness in my tracker in a couple hours
Title: Re: I NEED HELP!! wiring harness question!!
Post by: 87 sammi on November 02, 2007, 11:04:24 PM
ya i think im gunna try just swapping the whole thing out. thanks for your help!! hopefully itll all work out