ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bentparts on November 06, 2007, 02:50:24 PM

Title: Question for Mike Hagen Re: rear diff spacer
Post by: bentparts on November 06, 2007, 02:50:24 PM

Hey Mike, I've already done the front end widening with great results, and would like to do the rear over rotation. I'm using OME springs in the rear with a 1 3/4" spacer, ( the TT spacer began to squish) and a would like to know the dimentions of the spacer you made for the rear diff.  The photo's aren't that helpful, it just looks like a thick plate. Any help would be greatly appreciated. Or I could just buy yours, no really.

Title: Re: Question for Mike Hagen Re: rear diff spacer
Post by: Mikerpm4x4 on November 06, 2007, 06:44:18 PM

Unfortunatlely I do not remember. The guy that owns that plate now is 100 miles away. I belive it was 1 inch thick and I do know the link was mounted one set of holes off, meaning that the rear holes in the link would now mount in the front holes in the diff. from there it should be easy to make a pattern.

Mike

Title: Re: Question for Mike Hagen Re: rear diff spacer
Post by: bentparts on November 07, 2007, 03:37:26 AM

Thanks Mike, the thickness is all I really needed. I've made a couple already, but without the rotation they just twist up the coils and cause the rear to bind. Look forward to a better riding rear end! Mike