ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 94track on November 12, 2004, 08:43:24 AM

Title: what years will fit
Post by: 94track on November 12, 2004, 08:43:24 AM

i need to get a front diff. assembly and axles for my track. Does anyone know what years they are the same for, i am also assuming that a kick assem. will work also.  I have a 94 track 16v.  Also, anyone from nepa know of any junkyards that would have this, I really don't want to waste a trip down to harrys if i don't have to.  

Title: Re: what years will fit
Post by: wildgoody on November 12, 2004, 11:06:18 AM

If you get a diff and axles from the same
vehicle it really doesn't matter, all the diffs
will fit and work thru 97 or 98 at least.

What might make a difference is if you want
the strongest available, then you want the
26 spline axles and diff section

Good Luck
Wild

Title: Re: what years will fit
Post by: Bfunk on November 13, 2004, 01:21:08 AM

If only you weren't so far away.  I  have all that stuff sitting in pile on my garage floor.
Brian

Title: Re: what years will fit
Post by: 94track on November 13, 2004, 02:16:14 AM

thanks anyway brian, let me tell you 31's and some wheel hop can do some damage.

Title: Re: what years will fit
Post by: 94track on November 13, 2004, 07:32:50 AM

Why i need a new diff....


(http://img.photobucket.com/albums/v521/94track/break3.jpg)

Title: Re: what years will fit
Post by: blacknight on November 13, 2004, 09:34:30 AM

Get a steel one from a GV 99+ (with man. trans.)  its all steel plus the mount on the 3rd is beeffer too.  
George

Title: Re: what years will fit
Post by: 94track on November 13, 2004, 09:47:17 AM

are axles for the track going to be the right lengths with a diff from a gv?  what i mean is, is the GV diff going to be a direct replacement for my truck?  It would be great to have a steel diff., so this doesn't happen again.

Title: Re: what years will fit
Post by: explosivo on November 13, 2004, 09:59:47 AM

You can use the steel housing and 3rd with your tracker carrier/gears/axles (from what I understand.... I could be wrong), since the steel housing comes in auto GV's, which have a different gear ratio than the manual version.